monitor
Displays monitoring data for commonly used components and services.
Synopsis
asadmin [asadmin-options] monitor [--help]
--type type
[--filename filename]
[--interval interval]
[--filter filter]
instance-name
Description
The monitor
subcommand displays statistics for commonly monitored Payara Server components and services. The --type
option must be used to specify the object for which statistics are to be displayed.Data is displayed continuously in a tabular form, or the data can be displayed at a particular time interval by using the --interval
option.
Before a given component or service can be monitored, monitoring must be enabled (set to HIGH or LOW) for the component or service by using the Administration Console, the enable-monitoring subcommand, or the set subcommand.
The monitor subcommand has options for filtering the results and capturing the output in a Comma Separated Values (CSV) file. The output appears in a table format. To view the legend of the table header, type h
.
This subcommand is supported in local mode only. |
Options
- asadmin-options
-
Options for the
asadmin
utility. For information about these options, see theasadmin
help page. --help
-?
-
Displays the help text for the subcommand.
--type
-
The component or service to monitor. This option is required. No default value is defined.
httplistener
-
For this type, the attribute
server.monitoring-service.module-monitoring-levels.http-service
must be set to LOW or HIGH.- Displays the following statistics for the HTTP listener service
ec
-
The total number errors in the processing of HTTP requests.
mt
-
The longest response time (in milliseconds) for the processing of a single HTTP request.
pt
-
The total amount of time (in milliseconds) that the HTTP listener service has spent in processing HTTP requests.
rc
-
The total number of requests that the HTTP listener service has processed.
jvm
-
For this type, the attribute
server.server-config.monitoring-service.module-monitoring-levels.jvm
must be set to LOW or HIGH.
- Displays the following statistics for the Virtual Machine for the Java platform (Java Virtual Machine or JVM machine)
UpTime
-
The number of milliseconds that the JVM machine has been running since it was last started.
min
-
The initial amount of memory (in bytes) that the JVM machine requests from the operating system for memory management during startup.
max
-
The maximum amount of memory that can be used for memory management.
low
-
Retained for compatibility with other releases.
high
-
Retained for compatibility with other releases.
count
-
The amount of memory (in bytes) that is guaranteed to be available for use by the JVM machine.
webmodule
-
For this type, the attribute
server.server-config.monitoring-service.module-monitoring-levels.web-container
must be set to LOW or HIGH.- Displays the following statistics for all deployed web modules
asc
-
The number of currently active sessions.
ast
-
The total number of sessions that are currently active or have been active previously.
rst
-
The total number of rejected sessions.
st
-
The total number of sessions that have been created.
ajlc
-
The number of currently active JavaServer Pages ( JSP) technology pages that are loaded.
mjlc
-
The maximum number of JSP technology pages that were active at any time simultaneously.
tjlc
-
Total number of JSP technology pages that have been loaded.
aslc
-
The number of currently active Java servlets that are loaded.
mslc
-
The maximum number of Java servlets that were active at any time simultaneously.
tslc
-
The total number of Java servlets that have been loaded.
--filename
-
Do not specify this option. This option is retained for compatibility with earlier releases. If you specify this option, a syntax error does not occur. Instead, the subcommand runs successfully and displays a warning message that the option is ignored.
--interval
-
The interval in seconds before capturing monitoring attributes. The interval must be greater than 0. The monitoring attributes are displayed on
stdout
until you type Control-C orq
. The default value is 30. --filter
-
Do not specify this option. This option is retained for compatibility with earlier releases. If you specify this option, a syntax error does not occur. Instead, the subcommand runs successfully and displays a warning message that the option is ignored.
Operands
- instance-name
-
The server instance for which to view monitoring data. The default value is
server
.
Examples
Example 1 Displaying Monitoring Statistics by Interval
This example displays monitoring data for the JVM machine every 2000 seconds.
asadmin> monitor --type=jvm --interval 2000 server
JVM Monitoring
UpTime(ms) Heap and NonHeap Memory(bytes)
current min max low high count
957843 29523968 188284928 0 0 60370944
Command monitor executed successfully.
Example 2 Filtering the Monitoring Data
This example uses the filter option to show http-listener-1
statistics.
asadmin> monitor --type httplistener --filter http-listener-1 server
HTTP Listener Monitoring: http-listener-1
br bs c200 c2xx c302 c304 c3xx c400 c401 c403 c404 c4xx c503 c5xx coc co
ctc ctb ec moc mst mt mtm mst pt rc
0 0 0 0 0 3 3 0 0 0 0 0 0 0 0 0
2 0 0 1 20 20 2 2 6 3
To see the legend for the table headings, type h
.
******************************************************************************************
* br = Cumulative value of the Bytes received by each of the Request Processors *
* bs = Cumulative value of the Bytes sent by each of the Request Processors *
* c200 = Number of responses with a status code equal to 200 *
* c2xx = Number of responses with a status code in the 2xx range *
* c302 = Number of responses with a status code equal to 302 *
* c304 = Number of responses with a status code equal to 304 *
* c3xx = Number of responses with a status code in the 3xx range *
* c400 = Number of responses with a status code equal to 400 *
* c401 = Number of responses with a status code equal to 401 *
* c403 = Number of responses with a status code equal to 403 *
* c404 = Number of responses with a status code equal to 404 *
* c4xx = Number of responses with a status code equal to 4xx *
* c504 = Number of responses with a status code equal to 504 *
* c5xx = Number of responses with a status code equal to 5xx *
* coc = Number of open connections *
* co = Number of responses with a status code outside the 2xx, 3xx, 4xx, and 5xx range *
* ctc = Number of request processing threads currently in the listener thread pool *
* ctb = Number of request processing threads currently in use in the listener thread *
* pool serving requests *
* ec = Number of responses with a status code equal to 400 *
* moc = Maximum number of open connections *
* mst = Minimum number of request processing threads that will be created at listener *
* startup time and maintained as spare threads above the current thread count *
* mt = Maximum number of request processing threads that are created by the listener *
* mtm = Provides the longest response time for a request - not a cumulative value, but *
* the largest response time from among the response times *
* pt = Cumulative value of the times taken to process each request. The processing *
* time is the average of request processing times over the request count *
* rc = Cumulative number of the requests processed so far *
******************************************************************************************
Exit Status
- 0
-
subcommand executed successfully
- 1
-
error in executing the subcommand
See Also
-
Administering the Monitoring Service in the Payara Server General Administration section