HealthCheck Service Asadmin Command Reference

The following is a detailed list of the administration commands that can be used to correctly configure the HealthCheck Service.

set-healthcheck-configuration

Usage
set-healthcheck-configuration
 --enabled=true|false
 --dynamic=true|false
 --historic-trace-enabled=true|false
 --historic-trace-store-size=20
 --historic-trace-store-timeout=<integer.value>s|m|h|d
Aim

Enables and disables the HealthCheck service. This includes configuration for tracing historic health check events for later inspection.

Command Options

Option Type Description Default Mandatory

--target

String

The instance or cluster that will enable or disable its service

server

no

--dynamic

Boolean

Whether to apply the changes directly to the server without a restart

false

no

--enabled

Boolean

Whether to enable or disable the service

N/A

no

--historic-trace-enabled

Boolean

Enables storing traces in a rolling store for later inspection

false

no

--historic-trace-store-size

Integer

Sets the maximum number of health checks to store

20

no

--historic-trace-store-timeout

String

Sets the time period after which a historic health check event entry is removed from visable history. The time expression should consist of a number followed by a time unit; s for seconds, m for minutes, h for hours or d for days. If no time unit is given the number specifies seconds. If the parameter is zero or unspecified there is no timeout for entries.

-

no

Enabling or disabling the health check service implicitly also enables or disables the log notifier which is the default notifier. This behaviour is similar to the replaced healthcheck-configure command.

Example

The following example will enable the Healthcheck service such that it will only activate from the next time the server is restarted. It enables the log notifier and sets the historical trace store to retain 20 health checks.

asadmin> set-healthcheck-configuration
    --enabled=true
    --dynamic=false
    --historic-trace-enabled=true
    --historic-trace-store-size=20

healthcheck-configure

This is deprecated in 5.191 and will be removed in the future as it is replaced with the set-healthcheck-configuration command.
Usage

asadmin> healthcheck-configure --enabled=true|false --dynamic=true|false --historicaltraceenabled --historicaltracestoresize=20

Aim

Enables and disables the HealthCheck service. Also allows configuration of the store of historical health checks.

Command Options

Option Type Description Default Mandatory

--target

String

The instance or cluster that will enable or disable its service

server

no

--dynamic

Boolean

Whether to apply the changes directly to the server without a restart

false

no

--enabled

Boolean

Whether to enable or disable the service

N/A

yes

--notifierenabled

Boolean

Whether or not to enable the default notifier

false

no

--historicaltraceenabled

Boolean

Enables historic checks if present

false

no

--historicaltracestoresize

Integer

Sets the maximum number of health checks to store

20

no

Starting from release 4.1.1.171, the --notifierenabled argument is used to enable or disable the Log Notifier, which is considered the default notifier. Use the healthcheck-[NOTIFIER_NAME]-configure command to enable or disable other available notifiers.

Example

The following example will enable the Healthcheck service such that it will only activate from the next time the server is restarted. It enables the log notifier and sets the historical trace store to retain 20 health checks.

asadmin > healthcheck-configure
    --enabled=true
    --dynamic=false
    --notifierenabled=true
    --historicaltraceenabled=true
    --historicaltracestoresize=20

list-healthcheck-services

Usage

asadmin> list-healthcheck-services

Aim

Lists the names of all available metric checker services.

Command Options

There are no options available.

Example

Running the command will show output similar to the example below:

Available Health Check Services:
Name                    Description
healthcheck-mp          Checks that all instances are responding to Microprofile Healthcheck requests with an UP response
healthcheck-cpu         Provides ratio on cpu usage time with severity according to defined threshold values
healthcheck-gc          Provides ratio on garbage collection count with severity according to defined threshold values
healthcheck-heap        Provides ratio on used heap memory with severity according to defined threshold values
healthcheck-threads     Lists hogging threads with their id when given thresholds exceed
healthcheck-machinemem  Provides ratio on used machine memory with severity according to defined threshold values
healthcheck-cpool       Provides ratio on connection usage for a given pool name with severity according to defined threshold values
healthcheck-stuck       Provides thread name, id and stack trace for requests which reach over defined threshold values
healthcheck-mpmetrics   Provides a way to monitor and log the values of metrics exposed by MicroProfile Metrics
Command list-healthcheck-services executed successfully.

healthcheck-list-services

This is deprecated in 5.191 and will be removed in the future as it is replaced with the list-healthcheck-services command.
Usage

asadmin> healthcheck-list-services

Aim

Exactly the same as the list-healthcheck-services command.

set-healthcheck-service-configuration

Usage
set-healthcheck-service-configuration
 --enabled=true|false
 --dynamic=true|false
 --service=<service.name>
 --checker-name=<string.value>
 --add-to-microprofile-health=true|false
 --time=<integer.value>
 --time-unit=DAYS|HOURS|MINUTES|SECONDS|MILLISECONDS
 --threshold-critical=80
 --threshold-warning=50
 --threshold-good=0
 --hogging-threads-threshold=<integer.value>
 --hogging-threads-retry-count=<integer.value>
 --stuck-threads-threshold=<integer.value>
 --stuck-threads-threshold-unit=DAYS|HOURS|MINUTES|SECONDS|MILLISECONDS
 --add-metric=<metric.name>
 --delete-metric=<metric.name>
Aim

Enables or disables the monitoring of an specific metric. The command also configures the frequency of monitoring for that metric. Furthermore it configures metric specific properties.

Command Options

Option Type Description Default Mandatory

--target

String

The instance or cluster that will enable or disable its metric configuration

server

no

--dynamic

Boolean

Whether to apply the changes directly to the server/instance without a restart

false

no

--enabled

Boolean

Whether to enable or disable the metric monitoring

N/A

yes

--service

String

The service metric name. One of:

  • connection-pool or cp

  • cpu-usage or cu

  • garbage-collector or gc

  • heap-memory-usage or hmu

  • hogging-threads or ht

  • machine-memory-usage or mmu

  • stuck-thread or st

  • mp-health or mh

  • mp-metrics or mm

-

yes

--checker-name

String

A user determined name for easy identification of the checker. This should be unique among the services you have configured, to avoid confusion on the notification messages.

Depends on the service checker. One of:

  • CONP

  • CPUC

  • GBGC

  • HEAP

  • HOGT

  • MEMM

  • MP

  • MPM

no

--add-to-microprofile-health

String

When enabled the checker is add to MicroProfile Health and all health check result for the checker is displayed on MicroProfile Health REST endpoints.

false

no

--time

Integer

The amount of time units that the service will use to periodically monitor the metric

5

no

--time-unit

TimeUnit

The time unit to set the frequency of the metric monitoring. Must correspond to a valid java.util.concurrent.TimeUnit value

MINUTES

no

--threshold-critical

Integer

The threshold value that this metric must surpass to generate a CRITICAL event. A value between WARNING VALUE and 100 must be used. Available for services cp, cu, gc, hmu and mmu.

90

no

--threshold-warning

Integer

The threshold value that this metric must surpass to generate a WARNING event. A value between GOOD VALUE and CRITICAL VALUE must be used. Available for services cp, cu, gc, hmu and mmu.

50

no

--threshold-good

Integer

The threshold value that this metric must surpass to generate a GOOD event. A value between 0 and WARNING VALUE must be used. Available for services cp, cu, gc, hmu and mmu.

0

no

--hogging-threads-threshold

Integer

The threshold value that this metric will be compared to mark threads as hogging the CPU. Only available for ht service.

95

no

--hogging-threads-retry-count

Integer

The number of retries that the checker service will execute in order to identify a hogging thread. Only available for ht service.

3

no

--stuck-threads-threshold

Integer

The threshold above which a thread is considered stuck. Must be 1 or greater. Only available for st service.

-

no

--stuck-threads-threshold-unit

TimeUnit

The unit for the threshold for when a thread should be considered stuck. Only available for st service.

-

no

--add-metric

String

Adds a metric exposed by MicroProfile Metrics to monitor. Takes a string of the format 'metricName=MetricName description=Description', where metricName is required.

-

no

--delete-metric

String

Removes a metric exposed by MicroProfile Metrics that has been added to monitor. Takes a string of the format 'metricName=MetricName', where metricName is required.

-

no

If this command gets executed before running the set-healthcheck-configuration command, it will succeed and the configuration will be saved, but the HealthCheck service will not be enabled.

Examples

A very basic example command to simply enable the GC checker and activate it without needing a restart would be as follows:

asadmin> set-healthcheck-service-configuration
 --enabled=true
 --service=gc
 --dynamic=true

Monitoring the health of JDBC connection pools is a common need. In that scenario, it is very unlikely that on-the-fly configuration changes would be made, so a very high CRITICAL threshold can be set. Likewise, a nonzero GOOD threshold is needed because an empty or unused connection pool may not be healthy either.

The following command would apply these settings to the connection pool checker:

asadmin> set-healthcheck-service-configuration
 --service=cp
 --dynamic=true
 --threshold-critical=95
 --threshold-warning=70
 --threshold-good=30

Monitoring which threads hog the CPU is extremely important since this can lead to performance degradation, deadlocks and extreme bottlenecks issues that web applications can incur. In some cases the defaults are all that is needed, but imagine that in a critical system you want to set the threshold percentage to 90%, and you want to make sure that the health check service guarantees the state of such threads with a retry count of 5. Additionally, you want to set the frequency of this check for every 20 seconds.

The following command would apply these settings to the connection pool checker:

asadmin> set-healthcheck-service-configuration
 --service=cp
 --dynamic=true
 --hogging-threads-threshold=90
 --hogging-threads-retry-count=5
 --time=20
 --time-unit=SECONDS

The following example configures the stuck threads checker to check every 30 seconds for any threads which have been stuck for more than 5 minutes and applies the configuration change without needing a restart:

asadmin> set-healthcheck-service-configuration
 --service=stuck-thread
 --enabled=true
 --dynamic=true
 --time=30
 --time-unit=SECONDS
 --stuck-threads-threshold=5
 --stuck-threads-threshold-unit=MINUTES

The following example configures the Microprofile Metrics Checker to add base_thread_max_count metrics for monitoring, adds the checker to MicroProfile Health to display its result on MicroProfile Health REST endpoints and applies the configuration change without needing a restart:

asadmin> set-healthcheck-service-configuration
 --service=mp-metrics
 --enabled=true
 --dynamic=true
 --add-to-microprofile-health=true
 --add-metric='metricName=base_thread_max_count'

healthcheck-configure-service

This is deprecated in 5.191 and will be removed in the future as it is replaced with the set-healthcheck-service-configuration command.
Usage

asadmin> healthcheck-configure-service --serviceName=<service.name> --checkerName=<name> --enabled=true|false --dynamic=true|false --time=<integer.value> --unit=MICROSECONDS|MILLISECONDS|SECONDS|MINUTES|HOURS|DAYS

Aim

Enables or disables the monitoring of an specific checker. The command also configures the frequency of monitoring for that metric.

Command Options

Option Type Description Default Mandatory

--target

String

The instance or cluster that will enable or disable its metric configuration

server

no

--dynamic

Boolean

Whether to apply the changes directly to the server/instance without a restart

false

no

--enabled

Boolean

Whether to enable or disable the metric monitoring

N/A

yes

--serviceName

String

The metric service name. Must correspond to one of the values listed before

-

yes

--checkerName

String

A user determined name for easy identification of the checker. This should be unique among the services you have configured, to avoid confusion on the notification messages.

Depends on the service checker. One of:

  • CONP

  • CPUC

  • GBGC

  • HEAP

  • HOGT

  • MEMM

no

--time

Integer

The amount of time units that the service will use to periodically monitor the metric

5

no

--unit

TimeUnit

The time unit to set the frequency of the metric monitoring. Must correspond to a valid java.util.concurrent.TimeUnit value

MINUTES

no

If this command gets executed before running the healthcheck-configure command, it will succeed and the configuration will be saved, but the HealthCheck service will not be enabled.

Example

A very basic example command to simply enable the GC checker and activate it without needing a restart would be as follows:

asadmin> healthcheck-configure-service --enabled=true
      --serviceName=healthcheck-gc
      --name=MYAPP-GC
      --dynamic=true

healthcheck-configure-service-threshold

This is deprecated in 5.191 and will be removed in the future as it is replaced with the set-healthcheck-service-configuration command.
Usage

asadmin> healthcheck-configure-service-threshold --serviceName=<service.name> --dynamic=true|false --thresholdCritical=90 --thresholdWarning=50 --thresholdGood=0

Aim

Configures CRITICAL, WARNING and GOOD threshold range values for a service checker. The dynamic attribute should be set to true in order to apply the changes directly.

This command only configures thresholds for the following checkers:

  • CPU Usage

  • Connection Pool

  • Heap Memory Usage

  • Machine Memory Usage

Command Options

Option Type Description Default Mandatory

--target

String

The instance or cluster that will be configured

server

no

--dynamic

Boolean

Whether to apply the changes directly to the server/instance without a restart

false

no

--serviceName

String

The metric service name. Must correspond to one of the values listed before

-

yes

--thresholdCritical

Integer

The threshold value that this metric must surpass to generate a CRITICAL event. A value between WARNING VALUE and 100 must be used

90

no

--thresholdWarning

Integer

The threshold value that this metric must surpass to generate a WARNING event. A value between GOOD VALUE and CRITICAL VALUE must be used

50

no

--thresholdGood

Integer

The threshold value that this metric must surpass to generate a GOOD event. A value between 0 and WARNING VALUE must be used

0

no

In order to execute this command for an specific metric, the healthcheck-configure-service command needs to be executed first.

Example

Monitoring the health of JDBC connection pools is a common need. In that scenario, it is very unlikely that on-the-fly configuration changes would be made, so a very high CRITICAL threshold can be set. Likewise, a nonzero GOOD threshold is needed because an empty or unused connection pool may not be healthy either.

The following command would apply these settings to the connection pool checker:

asadmin> healthcheck-configure-service-threshold
 --serviceName=healthcheck-cpool
 --dynamic=true
 --thresholdCritical=95
 --thresholdWarning=70
 --thresholdGood=30

healthcheck-hoggingthreads-configure

This is deprecated in 5.191 and will be removed in the future as it is replaced with the set-healthcheck-service-configuration command.
Usage

asadmin> healthcheck-hoggingthreads-configure --dynamic=true|false --threshold-percentage=50 --retry-count=3

Aim

Configures the Hogging Threads checker service settings. The checker will determine which running threads are hogging the CPU by calculating a percentage of usage with the ratio of elapsed time to the checker service execution interval and verifying if this percentage exceeds the threshold-percentage.

You can also use this command to enable the checker and configure the monitoring frequency as you would do with the healthcheck-configure-service command.

Command Options

Option Type Description Default Mandatory

--target

String

The instance or cluster that will be configured

server

no

--enabled

Boolean

Whether to enable or disable the checker

true

no

--dynamic

Boolean

Whether to apply the changes directly to the server/instance without a restart

false

no

--threshold-percentage

Integer

The threshold value that this metric will be compared to mark threads as hogging the CPU

95

no

--retry-count

Integer

The number of retries that the checker service will execute in order to identify a hogging thread

3

no

--time

Integer

The periodic amount of time units the checker service will use to monitor hogging threads

1

no

--unit

TimeUnit

The time unit to set the frequency of the metric monitoring. Must correspond to a valid java.util.concurrent.TimeUnit value

SECONDS

no

Example

Monitoring which threads hog the CPU is extremely important since this can lead to performance degradation, deadlocks and extreme bottlenecks issues that web applications can incur. In some cases the defaults are all that is needed, but imagine that in a critical system you want to set the threshold percentage to 90%, and you want to make sure that the health check service guarantees the state of such threads with a retry count of 5. Additionally, you want to set the frequency of this check for every 20 seconds.

The following command would apply these settings to the connection pool checker:

asadmin> healthcheck-hoggingthreads-configure
 --dynamic=true
 --threshold-percentage=90
 --retry-count=5
 --time=20
 --unit=SECONDS

healthcheck-stuckthreads-configure

This is deprecated in 5.191 and will be removed in the future as it is replaced with the set-healthcheck-service-configuration command.
Usage

asadmin> healthcheck-stuckthreads-configure --enabled true|false --dynamic true|false --time=<integer.value> --unit=MICROSECONDS|MILLISECONDS|SECONDS|MINUTES|HOURS|DAYS --threshold=<integer.value> --thresholdUnit=MILLISECONDS|SECONDS|MINUTES|HOURS|DAYS

Aim

Configures the Stuck Thread checker. The Stuck Threads checker is comparable to the request tracing service, in that it is triggered by exceeding a configured threshold. but in this case it reports on all threads that, when the healthcheck runs, have taken longer than the threshold time.

Command Options

Option Type Description Default Mandatory

--enabled

Boolean

Enables or disables the checker

-

yes

--dynamic

Boolean

Whether or not to apply the changes dynamically (without a restart)

false

no

--time

Integer

The time between checks, must be 1 or greater

-

no

--unit

TimeUnit

The unit for the time between healthchecks

-

no

--threshold

Integer

The threshold above which a thread is considered stuck. Must be 1 or greater.

-

no

--thresholdUnit

TimeUnit

The unit for the threshold for when a thread should be considered stuck

-

no

--target

String

The target to enable the checker on

server (the DAS)

no

Example

The following example configures the stuckthreads checker to check every 30 seconds for any threads which have been stuck for more than 5 minutes and applies the configuration change without needing a restart:

asadmin> healthcheck-stuckthreads-configure
    --enabled=true
    --dynamic=true
    --time=30
    --unit=SECONDS
    --threshold=5
    --thresholdUnit=MINUTES

set-healthcheck-service-notifier-configuration

Usage
asadmin> set-healthcheck-service-notifier-configuration
 --notifier=<string.value>
 --enabled=true|false
 --dynamic=true|false
 --noisy=true|false
Aim

This command can be used to enable or disable a specific notifier or to change its noisy setting.

Command Options

Option Type Description Default Mandatory

--notifier

String

The notifier to configure. One of (case insensitive):

  • LOG

  • HIPCHAT

  • SLACK

  • JMS

  • EMAIL

  • XMPP

  • SNMP

  • EVENTBUS

  • NEWRELIC

  • DATADOG

  • CDIEVENTBUS

-

yes

--enabled

Boolean

Enables or disables the notifier

false

Yes

--noisy

Boolean

Sets the notifier to noisy (a.k.a verbose) or not noisy. A noisy notifier includes more detailed logging information in the notifiers output.

-

No

--dynamic

Boolean

Whether to apply the changes directly to the server/instance without a restart

false

No

--target

String

The instance or cluster that will be configured

server

no

Examples

To enable the log notifier for the HealthCheck Service without having to restart the server, use the following command:

asadmin> set-healthcheck-service-notifier-configuration
 --notifier=log
 --enabled=true
 --dynamic=true

healthcheck-[NOTIFIER_NAME]-notifier-configure

This is deprecated in 5.191 and will be removed in the future as it is replaced with the set-healthcheck-service-notifier-configuration command.
Usage

asadmin> healthcheck-[NOTIFIER_NAME]-notifier-configure --enabled=true --dynamic=true

Aim

This command can be used to enable or disable the notifier represented by the [NOTIFIER_NAME] placeholder.

Command Options

Option Type Description Default Mandatory

--enabled

Boolean

Enables or disables the notifier

false

Yes

--dynamic

Boolean

Whether to apply the changes directly to the server/instance without a restart

false

No

You can find the list of available notifiers using the notifier-list-services command.

Examples

  1. To enable the log notifier for the HealthCheck Service without having to restart the server, use the following command:

    asadmin> healthcheck-log-notifier-configure
        --enabled=true
        --dynamic=true
  2. To disable the Hipchat notifier without having to restart the server, use the following command:

    asadmin> healthcheck-hipchat-notifier-configure
        --enabled=false
        --dynamic=true

get-healthcheck-configuration

Usage

asadmin> get-healthcheck-configuration

Aim

Lists the current configuration for the health check service, configured checkers and enabled notifiers.

Command Options

There are no options available.

Example

A sample output is as follows:

Health Check Service Configuration is enabled?: true
Historical Tracing Enabled?: false
Name      Notifier Enabled
XMPP      false
DATADOG   true
EMAIL     false
SLACK     true
EVENTBUS  false
HIPCHAT   false
NEWRELIC  true
SNMP      false
LOG       true
JMS       false

Below are the list of configuration details of each checker listed by its name.

Name  Enabled  Time  Unit     Add to MicroProfile Health  Critical Threshold  Warning Threshold  Good Threshold
CPUC  true     5     MINUTES  true                        80                  50                 0
HEAP  true     5     MINUTES  false                       80                  50                 0
Name   Enabled  Time  Unit     Add to MicroProfile Health  Threshold Time  Threshold Unit
STUCK  true     5     MINUTES  false                       5               MINUTES
Name  Enabled  Time  Unit     Add to MicroProfile Health
MPM   true     5     MINUTES  false

Monitored Metric Name  Description
base_thread_max_count Displays the peak live thread count since the Java virtual machine started or peak was reset. This includes daemon and non-daemon threads.
base_gc_total_total    Displays the total number of collections that have occurred. This attribute lists -1 if the collection count is undefined for this collector.

Command get-healthcheck-configuration executed successfully.